创新故事

新西兰纳皮尔港

Port of Napier with a container ship at dock. Newly poured highly-modified pavement resists strain of port activities
介绍

纳皮尔港位于新西兰北岛东海岸,是该国中部地区的主要出口海港。该港口每周七天、每天24小时运营。据港口基础设施维护经理克拉克·柯蒂斯(Clarke Curtis)称,到21世纪前十年,港口吞吐量已增加了一倍左右。

挑战

The growth of the port’s throughputs was accompanied by an increase in heavy forklift and shipping container operations (front-axle loads of 100 tones/110 US short tons), causing severe pavement ruts of up to 85 mm (3.3 in) in the wheel paths. These ruts required constant maintenance as the forklifts would shake when passing over them.

决议

In 2010, New Zealand-based road infrastructure contractor Higgins proposed the use of HiMA to solve the problem. The new 20-year design life solution called for 10 cm (4 in) of HiMA-modified SP28 asphalt concrete on top of cement-stabilized, 75 cm of crushed river gravel; followed by 5 cm (2 in) of SP12.5 asphalt concrete wearing course using PG64E-22 SBS bitumen. That same year, the solution was applied to 420 m2 (4,521 ft2) of the heavily rutted section. Later that year, an additional 2,700 m2 (29,062 ft2) was paved with HiMA at the port.

Nine years and an estimated 700,000 20-ft equivalent units later, the trial section shows no signs of structural distress. “Deformation is estimated at less than 5 mm (0.2 in), and no cracking has been observed,” says Sean Bearsley, Technical Innovation and Implementation Manager, Higgins.

Following its experience at the port, Higgins constructed additional HiMA pavements in New Zealand. They include state highways, municipal streets, and additional port facilities totaling approximately 110,000 m2 (1.2 million ft2) of pavement.

相关产品和信息

延伸阅读

探索更多见解、新闻和成功案例。